The following talk about the precautions in the operation of CNC turning workpiece

Common problems of CNC turning workpiece operation: Ensure that the operating workpiece is firmly clamped, such as tools, tools, fixtures and other workpieces; All kinds of machine tools should be started at low speed and high speed to ensure that there is no problem in order to work, it is strictly prohibited to place other irrelevant items on the surface of the machine tool, the operator can not disassemble the excess iron pin by hand, to use professional special tools to disassemble, and to stand in a safe place to prevent the iron pin from splashing when the machine tool moves, the operator is prohibited to adjust the gearbox or change the running stroke during the machine tool operation. It is forbidden to touch the running surface with your hand during operation, to measure specifications during operation, and to transfer objects through part of the machine tool drive system.

In the production process of CNC turning parts, the operating standards should be strictly implemented, when the machine is running, you should not leave the post, when you leave, you should turn off the switching power, adjust the speed, stroke and tool need to park, the machine can not be carried out when the machine is running.

CNC turning process:

First, before processing

1. Operators strictly implement operating standards and wear relevant protective equipment.

2. Before operation, the operator should check whether all parts of the electrical appliance are normal, and then run after confirming that there is no problem.

Second, in operation

1. Ensure that the product workpiece in the operation is firmly clamped, such as tools, tools, fixtures and other product workpiece.

2. After all kinds of machine tools are started, they should be started at low speed and high speed to ensure that there is no problem before they can work.

3. No other irrelevant items are allowed on the machine table.

4, the operator can not forcibly remove the unwanted iron pin, should use professional special tools to remove, and to stand in a safe place to prevent the machine from moving the iron pin splash.

5. During the operation of the machine tool, the operator is forbidden to adjust the gearbox or change the running stroke, touch the running surface during processing, accurately measure the specifications during operation, and transfer objects through the machine tool transmission system.

6, in the production process, should strictly implement the operating standards, when the machine is running, you should not leave the post, when you leave, you should turn off the switch power, parking needs to adjust the speed, stroke, tools, etc., can not be carried out when the machine is running.

Third, after processing

At the end of the work, disconnect the switch power supply, remove the cutting tool, adjust the rocker of all components to the neutral position, and close the main brake box.

The explanation of CNC turning workpiece is here, thank you for watching, if you need to take the service of processing parts, you can entrust our company, well, I wish you a happy life, let's see you next time.